PAGE
07
NTI010hA
CHARACTERISTICS
Operating mechanism
type MR41E
MECHANICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
10s (optional for other values)
500 Nm (2000 cycles) or 350 Nm (10000 cycles)
1000 Nm (MR41E_A) or 2000 Nm (MR41E_C) (10000 cycles)
120 turns
21 turns before closed position
IP56
In position Out of Use (optional for other positions)
Padlock, keylock in option
Option
110Vdc (std), 48 Vdc, 120Vdc, 125Vdc, 220Vdc, 110Vac
single-phase, 230Vac single-phase, 12/208Vac three-
phase, 230/400 Vca three-phase - 50Hz/60 Hz.
110Vdc (std), 48 Vdc, 120 Vdc, 125 Vdc, 220 Vdc,
110Vac single-phase, 230 Vac single-phase - 50Hz/60 Hz
230Vac (option 110Vac) - 50 Hz / 60 Hz.
Class 2
Local and distance
300W
8O/8C (option 16O/16C)
Option
POSITION SELECTOR
The position selector has 4 operating modes :
Position
selector
switch
i
To help you, an instruction plate is affixed
on each operating mechanism casing.
To Next Page
Loading...