EasyManuals Logo

SDMO PRO 2000 User Manual

SDMO PRO 2000
Go to English
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
8.3. Specifications
Equipment model INVERTER PRO 2000 INVERTER PRO 2000 UK
Rated/maximum power 1600 W / 2000 W
Acoustic pressure level at 1 m (LpA)/measurement uncertainty 75 dB(A) / 0.70
Engine type Yamaha MZ80
Recommended fuel/fuel tank capacity Unleaded petrol / 4.2 L
Recommended oil/oil sump capacity SAE 10W30 / 0.4 L
Oil cut-out*
Direct current/Alternating current 12V - 8A / 230V - 7A
Circuit breaker**
Socket type***
1 x 2P+T-230V-10/16A
1 x 12V 8A
2 x 2P+T-230V-16A
1 x 12V 16A
Spark plug type BPR6HS
Dimensions l x w x h 49 x 28 x 44.5 cm
Weight (without fuel) 21 kg
This generating set complies with directive 97/68/CE on pollutant emissions.
*Oil cut-out: If there is no oil in the engine sump or if the oil pressure is low, the oil cut-out automatically stops the engine to prevent any
damage. If this occurs, check the engine oil level and top it up if necessary before looking for any other cause of the problem.
**Circuit breaker: The genset's electrical circuit is protected by one or more magnetothermal, differential or thermal cut-out switches. In
the event of an overload and/or short circuit, the supply of electrical energy may be cut.
If necessary, replace the circuit breakers in the generating set with circuit breakers with identical nominal ratings and specifications.
8.4. EC Declaration of conformity
Name and address of manufacturer :
SDMO Industries - 12 bis rue de la Villeneuve - CS 92848 -
29228 BREST Cedex 2 – France.
Name and address of the person authorised to create and keep
the technical file
L. Courtès - SDMO Industries - 12 bis rue de la Villeneuve -
CS 92848 - 29228 BREST Cedex 2 – France.
Product description : Make : Type : Serial numbers:
Generating set SDMO
INVERTER PRO 2000
3499231000724
INVERTER PRO 2000 UK
3499231000755
7DK 1670101 > 7DK 1671999
7DK 1680101 > 7DK 1695999
7DK 5600101 > 7DK 5605999
L. Courtès, the manufacturer's authorised representative, hereby declares that the product conforms to the following EU Directives:
2006/42/EC Machinery Directive ; 2006/95/EC Low Voltage Directive ; 2004/108/EC Directive on Electromagnetic Compatibility ;
2000/14/EC Directive relating to the Noise Emission of Outdoor Equipment.
For the directive 2000/14/EC :
Notified body :
Compliance
procedure :
Measured
sound power level:
Guaranteed
sound power level (LwA) :
Rated output :
ABOMA B.V. Galvanistraat, 1 -
Postbus 141 -6710 BC EDE -
Netherlands
Appendix VI. 88 dB(A) 89 dB(A) 1600 W
Brest, 01/11/2012
L. Courtès, Assistant Director, Design and Projects.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SDMO PRO 2000 and is the answer not in the manual?

SDMO PRO 2000 Specifications

General IconGeneral
BrandSDMO
ModelPRO 2000
CategoryInverter
LanguageEnglish

Related product manuals