Need help?Do you have a question about the SDMO R44C3 and is the answer not in the manual?
General| Voltage (V) | 230/400 |
|---|---|
| Frequency (Hz) | 50 |
| Fuel | Diesel |
| Output Voltage | 230/400 V |
| Output Power | 32 kW |
| Phase | 3 |
| Engine Model | Kubota D1105 |
| Noise Level | 72 dB(A) |
| Dimensions | 175 x 77 x 115 cm |
Provides general advice and recommendations for operating and maintaining the generating set.
Explains the various safety pictograms used in the manual and on the equipment.
Details critical instructions and safety regulations for safe operation and maintenance.
Lists the detailed technical specifications of the generating set, including performance data.
Explains how to identify generating sets and their components using identification plates.
Describes the fluid retention system for containing leaks and spills.
Specifies the recommended fuels and consumables for the generating set.
Provides safety instructions and procedures for unloading the generating set.
Guidelines for selecting an appropriate and safe location for the generating set.
Instructions on safe methods for moving the generating set.
Details on making electrical and other necessary connections for the generating set.
Describes essential protection measures, including earthing and differential protection.
Provides a summary diagram for connecting the generating set based on earthing systems.
Discusses special arrangements or considerations for installation.
Instructions for correctly coupling the trailer to the tow vehicle.
Essential checks to perform on the trailer before towing.
Guidance on the operation of the trailer, including speed limits and braking.
Procedures for safely unhitching the trailer from the tow vehicle.
Steps for implementing the trailer during installation.
Detailed instructions for adjusting the trailer's braking system.
Troubleshooting guide for common faults and repair procedures for the trailer.
Diagram illustrating the electrical connections for the trailer.
Technical data regarding the trailer's wheels, tires, and load capacities.
Essential checks to perform after installation before operating the set.
Checks to be carried out immediately after the generating set has started.
Detailed pre-start inspection procedures for the generator set.
Information specific to the generator set using the NEXYS control panel.
Information specific to the generator set using the TELYS control panel.
A reminder on how the operating environment affects the maintenance schedule.
Crucial safety instructions to be followed before any maintenance operation.
A comprehensive table outlining maintenance tasks and their intervals.
Guidance on how to find and diagnose faults in the generating set.
Procedures and notes for performing no load and under load tests.
Guidelines for the safe storage and transport of batteries.
Instructions for preparing and setting a battery into service.
Procedures for checking the battery's charge status and electrolyte.
Information on battery charging procedures and optimal charging parameters.
A troubleshooting guide for common battery faults and their solutions.
Reference to the separate engine user and maintenance manual.
Reference to the separate alternator user and maintenance manual.
To Next Page
