3.1.2 Instructions for unloading
Hoisting
î™® Attach the sling on the lifting equipment to the ring on the generating set (no. 1) provided for this purpose. Tension the slings
slightly.
 Check that the sling is correctly attached and the equipment is steady.
î™° Lift the generating set carefully.
î™± Direct the generating set towards the chosen location and stabilise it.
 Carefully set down the equipment while continuing to position it.
 Release the sling, then detach it.
Forklift truck:
î™® Position the arms of the forklift truck in the forklift pockets (no. 2).
 Lift the equipment, handling it gently.
î™° Set down the generating set in its unloading position.
1
2
To Next Page
Loading...
Need help?
General
