2.3. Fluid retention
Any outflow of the fluids contained in the generating sets (fuel, oil and coolant, or rainwater or condensation) will be collected in a
retention container.
The containers have a capacity which allows 110% of the fluids contained in the generating set fitted with this option to be collected.
Diagram 2.3: Fluid retention container
The generating sets are fitted with a visual alarm warning when the upper limit of the retention container has been reached.
In all cases, the retention containers must be regularly checked to ensure they contain no fluid (fuel, oil and coolant, or rainwater or
condensation). If necessary, drain the containers via the drain port.
 Note: Never allow these fluids to drain onto the ground; ensure they are collected in a designated container.
2.4. Fuel and consumables
All specifications (product features) are given in the engine maintenance manuals attached to this manual.
Fuels:
The specifications refer to European or international standards. Fuels complying with the standards indicated in the engine
maintenance manuals can be used without any contraindications. Only these fuels may be used.
Consumables:
In addition to the specifications indicated in the engine maintenance manuals, the consumables mentioned in the section entitled
"Specifications" are recommended.
To Next Page
Loading...
Need help?
General
