2.4.1 Specifications
2.4.1.1. Oil grades
Engine Oil
Make Type Make Type
John Deere All
John Deere John Deere PLUS-50
GenPARTS GENLUB TDX 15W40
MITSUBISHI All GenPARTS GENLUB TDX 15W40
Volvo All GenPARTS GENLUB TDX 15W40
GENLUB TDX 15W-40
Top-of-the-range lubricant recommended for diesel engines: for generating sets used under severe conditions.
USES:
 Particularly suited to more modern engines with or without turbochargers, intercoolers, or sophisticated injection systems (e.g.
HEUI, injector-pumps).
 All types of use: can cope with the most demanding applications.
 Depolluted engines: complies with EURO 2 and EURO 3 technology and can be used with all types of diesel fuel, especially
ecological diesel with low sulphur content.
PERFORMANCE:
ACEA E3
API CH-4
 Meets level E3 of the specifications defined by European manufacturers in the ACEA standards 98 edition.
ADVANTAGES:
 Less frequent oil services: this product has been put to the test during thousands of hours of use on worksites under varying
conditions, demonstrating its high quality.
 Conformity with new environmental legislation: adherence to new anti-pollution standards required for new EURO 2 and
EURO 3 engines.
SPECIFICATIONS:
SAE Grade
15W-40
Density at 15°C 0.883
Cinematic viscosity at 40 °C
Cinematic viscosity at 100 °C
105
14.1
mm2/s (cSt)
mm2/s (cSt)
Viscosity index 140
Dynamic viscosity at -15 °C 3000 mPa.s(cP)
Pour point - 30 °C
Flash point 220 °C
Sulphated ash content 1.4 % weight
(Values given as examples only)
To Next Page
Loading...
Need help?
General
