SDMO R44C3 - Display of Messages in Zone 4

Screen
no.
Pictograms Data displayed
P10
Fuel Level Indicator
Indication of Battery Voltage
Indication of Battery Amps
Screen order of appearance according to network type with the generating set on.
Type of network
Order of appearance 3P+N 3P 2P+N 1P+N
1 P3 P3 P3 P3
2 P4 P4 P6 P7
3 P5 P8 P8 P9
4 P8 P9 P9 P2
5 P9 P2 P2 P10
6 P2 P10 P10
7 P10
Change screens by using the scrolling and selection wheel.
When the wheel is rotated clockwise, the screens scroll upwards and vice-versa.
The screens scroll in a loop.
E.g.: On three-phase + neutral network, then screen 7, then screen 1 and vice-versa.
6.3.1.6. Display of messages in zone 4
The display (zone 4), among other things, displays messages relating to the operation of the generating set. The messages are as
follows:
Initialisation of TELYS
Screen no. Screen Data displayed
G 1
Initialisation of TELYS when the power is switched
on and/or when loading a configuration
G 2
SERIAL No.: 08030010000
SOFTWARE: 6.1.0
NOMINAL VOLTAGE: 400V
FREQUENCY: 50Hz
NOMINAL KW: 320kW
EARTH SYSTEM: TNS
Generating set serial no.
Software version of TELYS
Alternator Nominal Voltage
Alternator Nominal Frequency
Nominal Active Output
Neutral Point
Bar graph indicating the display delay of the screen
51/202