To Next PageTo Next Page
Need help?Do you have a question about the SDMO DJINGO 2000 and is the answer not in the manual?
General| Maximum power (LTP) | 2.0 kW |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Fuel | Petrol |
| Noise Level at 7 m | 68 dB(A) |
| Starting | Recoil starter |
| Engine Type | 4-stroke |
Read this manual carefully and follow the safety and maintenance advice and user instructions for your generating set.
Explains warning symbols and identification plates on the generating sets.
Introduces general instructions and safety rules for operating the generating set.
Details warning symbols and their meanings to ensure user safety.
Provides fundamental safety considerations and general advice for handling and operating the generating set.
Offers specific safety instructions to prevent electrocution hazards.
Outlines precautions to prevent fire hazards when using the generating set.
Provides safety advice regarding exhaust gases, especially in enclosed areas.
Details safety measures to be taken when filling the fuel tank.
Advises on avoiding burns from hot motor or silencer parts.
Specifies safety precautions for handling batteries, including tools and electrolyte.
Offers guidance on proper disposal of used oil and noise considerations.
Warns about the dangers of moving parts and how to avoid injury.
Explains how to calculate and avoid overloading the generating set.
Details standard operating conditions and factors affecting performance like temperature and altitude.
Identifies and describes the main components of the generating set as shown in Diagram A.
Instructions on how to check and top up the engine oil level before operation.
Procedure for checking and filling the fuel tank safely.
Guidance on correctly earthing the generating set for safety and static dissipation.
Advice on selecting a suitable, safe, and stable location for operating the set.
Step-by-step guide on how to start the generator set, including choke and starter use.
Instructions for operating the set once it has started and stabilized.
Procedure for safely shutting down the generator set and cooling it down.
Explains the automatic motor shut-off mechanism due to low oil level.
Describes the function of the circuit breaker for electrical protection.
General advice on following the maintenance programme based on operating environment.
A table detailing maintenance tasks and their recommended intervals.
Detailed instructions for cleaning the air filter element safely.
Procedure for cleaning the fuel filter and bowl.
Instructions on how to change the engine oil, including warm drainage.
Guide for inspecting, cleaning, and checking the gap of the spark plug.
Emphasizes the importance of daily checks for loose fasteners.
Instructions for general cleaning of the generating set exterior.
