To Next PageTo Next Page
Need help?Do you have a question about the SDMO VERSO S and is the answer not in the manual?
Configures the locking mechanism for the changeover switch.
Details the functions associated with specific terminals on the switch.
Configuring voltage and frequency thresholds (AU/AF) and hysteresis.
Setting delay timers such as DBT, MFT, and MRT for automatic functions.
Procedure for handling mains power failure and related parameters.
Procedure for confirming mains power return and system response.
Describes the activation, loss, and return confirmation for EJP pre-notice.
Describes the activation, loss, and return confirmation for TOP EJP.
Describes the automatic closed cover and manual open cover operational modes.
Details the procedure for operating the switch using manual control.
Explains the padlocking feature for factory setting and security.
Guidelines for physically placing, securing, and locking the source changeover switch unit.
Details on connecting cables, auxiliary equipment, and configuring the switch settings.
Procedures for de-consigning, powering up, and testing the installed unit.
Optional extension unit and bridging bars for connection flexibility.
Optional covers for protection and sealing of the unit.
Optional taps and contacts for auxiliary signals and measurements.
Operating and storage temperature ranges for the unit.
Details on the unit's mass and storage period.
Environmental specifications for humidity and altitude.
Configures the locking mechanism for the changeover switch.
Details the functions associated with specific terminals on the switch.
Configuring voltage and frequency thresholds (AU/AF) and hysteresis.
Setting delay timers such as DBT, MFT, and MRT for automatic functions.
Procedure for handling mains power failure and related parameters.
Procedure for confirming mains power return and system response.
Describes the activation, loss, and return confirmation for EJP pre-notice.
Describes the activation, loss, and return confirmation for TOP EJP.
Describes the automatic closed cover and manual open cover operational modes.
Details the procedure for operating the switch using manual control.
Explains the padlocking feature for factory setting and security.
Guidelines for physically placing, securing, and locking the source changeover switch unit.
Details on connecting cables, auxiliary equipment, and configuring the switch settings.
Procedures for de-consigning, powering up, and testing the installed unit.
Optional extension unit and bridging bars for connection flexibility.
Optional covers for protection and sealing of the unit.
Optional taps and contacts for auxiliary signals and measurements.
Operating and storage temperature ranges for the unit.
Details on the unit's mass and storage period.
Environmental specifications for humidity and altitude.
General