SDMO VERSO 50 - User Manual

VERSO 50_v1.0.27_EN 33502027401_3_1 page 1/24
VERSO 50
Instructions Manual
Release: 1.0.27
33502027401_3_1

Summary

1- GENERAL REQUIREMENTS AND INSTALLATION

1-1 General notes

Essential safety and operational guidelines for using the equipment.

1-2 Product Label and Rating plate

Details information found on the unit's identification and rating plate.

1-3 Hardware ratings

1-4 Electrical Installations

1-5 Connections

1-6 Operation modes

1-6.1 Automatic mode

How the system operates automatically, including mains failure logic.

1-6.2 Manual mode

Details manual operation of remote start output and load switching.

1-6.3 Reset mode

Reset mode for clearing alarms and deactivating remote start.

1-6.4 Test mode

Covers manual and automatic test procedures for generator verification.

1-6.5 Alarms

How alarm messages are displayed and alarms are reset.

1-7 Equipment Overview

1-8 Display pages

1-8.1 Mains

Shows current mains voltage and frequency status.

1-8.2 Mains stats

Displays maximum measured mains voltage and associated timestamps.

1-8.3 Generator

Displays generator voltage and frequency readings.

1-8.4 Generator stats

Shows maximum measured generator voltage and timestamps.

1-8.5 Hours

Tracks total work hours of generator and contactor operations.

1-8.6 Events log

Lists recent events and alarms with their respective dates and times.

1-8.7 Clock and warranty

Displays current date/time and warranty expiry information.

1-8.8 I;O Monitor

Shows status of inputs and outputs, including EJPT and remote start.

1-8.9 Info page

Provides manufacturer contact details and web address.

1-8.10 System data

Displays project info, firmware, and software versions.

1-8.11 Logo page

Shows the manufacturer's logo and website.

2- PROGRAMMATION MENUS

2-1 Navigation instructions

Explains menu navigation, password entry, and parameter modification.

2-2 M1 - Mains setup

2-3 M2 - Alternator setup

2-4 M3 - Test setup

2-5 M4 - General setup

2-5.1 M4.1 - Display setup

Configures language, backlight, contrast, and event log display.

2-5.2 M4.2 - Clock setup

Sets year, month, day, hour, and minute for the controller's clock.

2-5.3 M4.3 - Security setup

2-6 M5 - Alarms list

2-7 M6 - EJPT setup

2-8 M7-Counters

2-9 M8-Measures

3- PANELS - ELECTRICAL DRAWINGS

3-1 Single Phase - 40 A

Wiring diagram for a single-phase, 40A configuration.

3-2 Single Phase - 100 A

Electrical schematic for a single-phase, 100A setup.

3-3 Three Phase - 25 A

Wiring diagram for a three-phase, 25A configuration.

SDMO VERSO 50 Specifications

General

Brand	SDMO
Model	VERSO 50
Category	Switch
Language	English