24
www.sdrplay.com
V 1.1
The SDRplay RSP1B is our entry-level wideband full
featured 14-bit SDR receiver which covers the RF
spectrum from 1kHz to 2GHz. The RSP1B comes in a
rugged black painted steel case and includes extensive
filtering to minimize the problems seen with cheaper,
lower resolution “dongles”. All it needs is a computer
and an antenna to provide excellent communications
receiver functionality. It comes with a choice of
SDRuno
TM
for Windows and multiplatform SDRconnect
TM
SDR software for Windows, MacOS and Linux/
Raspberry Pi (supplied free of charge by SDRplay). You
can monitor up to 10MHz of spectrum at a time.
RSP1B
RSPdx-R2
The SDRplay RSPduo is a complete dual-tuner SDR
receiver. Like the other models, it’s a wideband full
featured 14-bit SDR which covers the RF spectrum from
1kHz to 2GHz giving 10MHz of spectrum visibility.
Alternatively, it can simultaneously monitor two
completely separate 2MHz bands of spectrum anywhere
between 1kHz and 2GHz. Perfect for real-time antenna
comparisons. With either our Windows SDRuno or our
multi-platform SDRconnect software, the RSPduo offers
diversity tuning. This enables both signal enhancement
and noise cancellation. The RSPduo also provides three
software selectable antenna inputs, one of which is a
high impedance input for direct connection to a long
wire antenna.
The multi-antenna SDRplay RSPdx-R2 adds to the
functionality of the RSP1B, by providing three software
selectable antenna inputs and an external clock input. It
offers enhanced HF performance and has a special
“HDR mode” optimised for the demanding radio
reception conditions below 2MHz. An additional 500kHz
low pass filter is also included for LF/VLF enthusiasts.
RSPduo
Available from SDRplay www.sdrplay.com/
purchase or one of our authorised resellers:
nRSP-ST Networked 1kHz - 2GHz SDR receiver
Operating Instructions
Thank you for choosing the nRSP-ST all-in-one, plug-and-play networked receiver. This
Software Defined Radio (SDR) receiver is designed to be connected to a computer network
via either the ethernet port or a Wi-Fi connection. Access to, and operation of the radio is by
use of multi-platform SDRconnect
TM
client software provided and supported by SDRplay Ltd.
Included with this nRSP-ST unit is an AC mains power supply and Wi-Fi antenna.
Please read this booklet carefully before using this product. Follow all instructions and
warnings provided in this booklet and the relevant website links. Do not use this product in any
way that is not specified in this booklet or in the relevant website links. Do not modify or
tamper with this product or its components. Doing so may void your warranty and affect your
product's performance, safety, and compliance.
For the End User License Agreement and Warranty Statement,
go to www.sdrplay.com/terms
For the latest Product Information
go to www.sdrplay.com/nRSPst
For additional information and Help, additional links to Documentation, Video guides and
Support can be found at www.sdrplay.com/help
SDRplay Ltd
PO Box 1180, Princes Risborough, HP22 9TD, UK
& The Black Church, St Mary’s Place, Co. Dublin, D07 P4AX, Ireland, EU
www.SDRplay.com
©2024 SDRplay. All rights reserved. SDRplay and RSP product names are trademarks of
SDRplay, registered in many jurisdictions world-wide
To Next Page
Need help?
General
