Thanks for your purchase!
Our car audio equipment lets you enjoy diversified functions and
enjoy superior music quality. We hope you enjoy this product.
INDEX
Caution P. 2
Installation P. 3
Specification P. 5
Button and key functions P. 6
Playback operation P. 7
Electrical Connection P. 9
Wiring diagram P. 10
Remote operation P. 11
Troubleshooting P. 13
CAUTION
This unit is designed to operate on 12-volts DC, negative
ground electrical system only, do not attempt to install this unit
in a vehicle having a positive ground system. Please do not
install the unit to a +24V truck, bus or RV, otherwise the
machine will be damaged.
You should not touch the high-polished playback head with any
metallic or magnetic tools.
Please do not replace the power fuse without professional
guidance. Improper use of fuses may cause damage or fire.
To avoid electric shock caused by short circuit, or any
unnecessary damage and fire, please prevent the product from
a wet environment and water.
Metal parts of this unit (especially on the back) become quite
hot during operation, to be careful to avoid touching parts other
than the handle immediately after removing the unit.
Note:
1. When the inside temperature of car is much higher or lower,
please adjust the temperature in car first, then use the machine.
2. Avoid suffering strong attack, which will damage structural
components of the machine.
3. Operate the unit in accordance with the instruction manual,
damage caused by mal-operation is not covered under warranty.
4. Your unit has built-in filtering to eliminate most of the noise that
might come through the power source. However, with some
vehicles, particularly older models, some clicking or other unwanted
noise might be present.
To Next Page
Loading...
