SEA BEYOND INT’L T-REX User Manual

Thanks for buying one of these great T-REX scooters! There are
10 easy steps to putting your scooter together. Please read the
instruction carefully before you start riding scooter.
Easy Step Installation
1. Unpack the scooter by opening the top of
the box and remove the loose parts at the
top. Remove the Styrofoam holding the
front wheel by tipping it back toward the
rear of the scooter while you hold the
handle-bar post. Then remove the rear
Styrofoam.
2. Find your tools and attach the steering
column to its hinge. Don't make it too tight
for now but later you might want to tighten
this if the column is too loose. 13mm and
14mm wrenches required.
See “Steering Adjustment Guide”.
3. Lock the steering column in place
by rotating the locking bolt up and
then turning the nut clockwise. It
works just like the one on a typical
bicycle seat post.
10

SEA BEYOND INT’L T-REX Specifications

General

Brand	SEA BEYOND INT’L
Model	T-REX
Category	Scooter
Language	English