Sea-doo Spark Series User Manual

52 SAFETY INFORMATION
4. Release the iBR lever, there
should not be any reverse thrust.
WWAARRNNIINNGG
AAllwwaayyss eennssuurree pprrooppeerr iiBBRR ssyysstteemm
ooppeerraattiioonn bbeeffoorree ttaakkiinngg tthhee wwaatteerr--
ccrraafftt oouutt ffoorr aa rriiddee..
VVaarriiaabbllee TTrriimm SSyysstteemm ((VVTTSS)) ((iiff
eeqquuiippppeedd))
With the engine running in forward
thrust, use the VTSTM system to
move the jet pump nozzle up, and
then down alternately to check VTS
operation. Confirm the VTS position
indicator movement in the information
center.
Also test the VTS preset trim positions
by double clicking the VTS UP/DOWN
button (as applicable to model).
Refer to
Operating Instructions for de-
tailed instructions.
PRE-RIDE INSPECTION

Sea-doo Spark Series Specifications

General

Displacement	899 cc
Hull Material	Polytec
Model	Spark, Spark Trixx
Engine Type	Rotax 900 ACE
Horsepower	60 hp / 90 hp
Fuel Type	Gasoline
Fuel Capacity	7.9 US gal (30 L)
Seating Capacity	2 or 3
Length	120 inches (305 cm)
Width	46 in (117 cm)