Sea-doo Spark Series User Manual

71
TTYYPPIICCAALL
1. Drain plug
1. Untighten
2. Tighten
NNOOTTIICCEE
EEnnssuurree ddrraaiinn pplluuggss aarree pprrooppeerrllyy
sseeccuurreedd pprriioorr ttoo llaauunncchhiinngg tthhee
wwaatteerrccrraafftt iinn wwaatteerr..
SSppoonnssoonnss
Two fixed sponsons, one on each side
at the rear of the hull, assist in water-
craft stability. The sponsons are not
adjustable.
1. Sponson
RReeaarr FFoooottrreessttss ((TTrriixxxx
MMooddeellss))
Angled footrests used to enhance
control when purposely raising the
bow.
AAddjjuussttaabbllee HHaannddlleebbaarr RRiisseerr
((TTrriixxxx MMooddeellss))
The handlebar height can be set to
suit the operator's preference.
1. Unlock the mechanism using the
lever.
2. Adjust the handlebar to the desired
height.
3. Lock the mechanism using the
lever.
AAuuddiioo SSyysstteemm ((IIff EEqquuiippppeedd))
Some models are equipped with a
portable audio system.
The BRP audio system is composed
of two waterproof speakers, two twee-
ters, one passive radiator, a keypad, a
charging port and a vent port. The
system connects via Bluetooth to a
smartphone.
EQUIPMENT

Sea-doo Spark Series Specifications

General

Displacement	899 cc
Hull Material	Polytec
Model	Spark, Spark Trixx
Engine Type	Rotax 900 ACE
Horsepower	60 hp / 90 hp
Fuel Type	Gasoline
Fuel Capacity	7.9 US gal (30 L)
Seating Capacity	2 or 3
Length	120 inches (305 cm)
Width	46 in (117 cm)