11
WaterSnake
Motor Canopy
Fish-n-Troll
Honda Motor
Motormount Boat SE9 | DEFLATION & FOLDING
Deflation is as easy as 3,
2, 1.
Deflate in the reverse order
chamber 3, then 2, then 1,
and finally, the floor! If the
order is reversed, air will be
trapped in chamber 3, and
chamber 1 will then have
to be re-inflated.
Allow most of the air to
escape and pull one side
completely over the other.
Pull the other side over the
first until it overlaps the
boat as shown.
A) Fold the aft end over
approximately a third of
the way up the boat.
B) Fold the front of the
boat over the last fold.
C) Fold in half.
To Next Page
Loading...
