To Next PageTo Next Page
Need help?Do you have a question about the SEA SCUTI and is the answer not in the manual?
General| Brand | SEA |
|---|---|
| Model | SCUTI |
| Category | Gate Opener |
| Language | English |
Describes the Scuti automation unit's self-contained power mono-bloc and its two main parts.
Details Scuti unit versions with or without hydraulic lock and its manual release device positions.
Lists technical data for the electric motor: thermal switch, rotation, current, power, and speed.
Presents hydraulic pump capacities including flow rate and pressure.
Guides model selection based on door size/weight, referencing EN standards, and provides usage examples.
Explains connection to electronic unit, manual release mechanism, and external release device installation.
Outlines the general installation process and refers to Fig. 2 for required fixing accessories.
Checks door build, frame fit, smooth manual movement, and lubricates door gear for optimal performance.
Details fitting side brackets, operator brackets, and telescopic arms for single-piece doors.
Guides positioning the operator, running it to limit stop, and adjusting for correct door closed position.
Instructions for automating large doors (>3.5m wide or >2.5m high) using two Scuti units.
Details installation for folding doors, specifying bracket and shaft positioning relative to hinges.
Installation guidelines for doors with horizontal top guide tracks, focusing on unit and bracket placement.
Addresses special cases where telescopic arms cannot be fitted inline, requiring arm modification.
Addresses adjusting the door's counter balance to compensate for unit weight for smooth operation.
Guides on checking electrical connections, rotation direction, and timing adjustments for the operator.
Details pressure adjustments for opening/closing, maximum crushing force, and calibration notes.
Advises on regular servicing: greasing moving parts, checking oil level, and frequency of oil changes.
Shows typical electrical layout with accessories and provides recommendations for cabling and safety.
Lists critical electrical safety precautions, including earthing, cable separation, and differential switches.
Clarifies the Scuti operator is designed solely for the automation of vertical track doors.
Advises on responsible disposal of the product and its packing materials.
Lists the directives (Machine, EMC) the Scuti operator conforms to.
Specifies acceptable storage temperatures (-40°C to +85°C) and humidity levels (5%-90%).
States that decommissioning and maintenance must be performed by authorized and specialized personnel.
Details the 24-month guarantee, conditions for voiding it, and validity to the original purchaser.
