Need help?Do you have a question about the SEA ALPHA Series and is the answer not in the manual?
General| Brand | SEA |
|---|---|
| Model | ALPHA Series |
| Category | Gate Opener |
| Language | English |
Key safety guidelines covering operation, testing, maintenance, and user responsibilities for gate operators.
Provides detailed technical specifications for ALPHA 330 and ALPHA 550 models, including power, current, and dimensions.
Provides detailed installation dimensions (A, B, C) for ALPHA 550 PLUS and ALPHA 330 STANDARD models.
Attaching the operator to the back bracket, releasing the arm, and adjusting the shaft extension for proper operation.
Diagram and pinout for Alpha Standard 110V operator electrical connections to the control unit.
Mandatory requirement for all maintenance operations to be performed exclusively by an authorized installer.
Step-by-step instructions to release the operator using the key and releasing lever.
Steps to re-lock the operator after manual release, involving the lever, key, and gate movement.
Identifies potentially dangerous points in the gate operation that require thorough risk assessment by the installer.
Installer must assess risks, prevent hazards, use approved parts, and provide warning notices.
Defines manufacturer's limited responsibility and warranty conditions, voided by unauthorized parts or modifications.
Emphasizes using SEA-approved parts, compliance with safety standards, and installer responsibility.
Outlines warranty periods for different motor types and conditions that void the warranty, including installation errors.
To Next Page
