SEA VELA User Manual

INSTALLATION MANUAL
Thank you for choosing a SEA s.r.l. product. This choice will give you
the opportunity to understand that our company aims at combining
high-tech and remarkable reliability and safety, thanks to studies,
research and the accurate analysis of our customers' needs, without
undermining the simple use and installation of our products.
General features
VELA is an electro-mechanical barrier (2, 3, 4, 5 m) recommended for
the automation of access points which require a high opening/closing
speed (parking lots, motorways, airports, etc.) and frequent use
features.
The automation comes with an anti-squeezing safety system
through by pass valves for the regulation of the force which doesn't
exceed 15 kg on the beam, protecting people and things from possible
accidents. A system of hydraulic deceleration (on request) guarantees
the total control of the present inertial force in case of lack of power
supply and a release system allows the manual opening in case of
emergency.
The automation system is composed of the following elements:
1 Adjustable mechanical stop
2 Manual release with DIN key
3 Galvanised steel rocker arm
4 VELA, casing cover with lock and DIN key
5 Balancing spring
6 Electronic control unit GATE 1 (code 23001120/1), a complex device which can be used to program and manage all
the operation and safety systems
7 Fixation plate out of galvanized steel
8 Hydraulique unit
9 Roller bearing
10 Cataphoresis-treated and polyester painted VELA casing, for outside, protects all included mechanical and
electronic devices from fire, flood, lightning, etc.
Predisposed for the application of photocells GHOST 40, key switch Key Plus, proximity reader Reader Prox.
Stainless steel casing available on request.
English
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
1010
88
66
55
44
33
22
11
77
99
Cod. 67410035 Rev 06 - 06/2010
15

SEA VELA Specifications

General

Brand	SEA
Model	VELA
Category	Gate Opener
Language	English

Summary

Product Overview and Specifications

General Features

Overview of VELA barrier's general characteristics and safety systems.

Technical Features

Detailed technical specifications of the VELA barrier, including power, dimensions, and operating parameters.

Installation Instructions

Spring Position and Mounting

Describes spring positioning for mounting and its attachment to the rocker arm.

Foundation and Post Anchoring

Instructions for preparing and anchoring the foundation plate and mounting the post.

Beam Installation

Procedures for mounting round, rectangular, and oval beams onto the barrier.

Beam Balancing and Levelling

Procedures for balancing the beam's weight and ensuring correct levelling at stroke ends.

Force Adjustment and Electrical System

How to adjust beam force and details of the electrical system wiring.

Operation and Maintenance

Release System Operation

Steps for manually releasing and re-locking the barrier beam in case of emergency.

Periodical Maintenance Schedule

Schedule and checks for routine periodic maintenance of the VELA automation system.

Initial Check and Putting in Service

Procedures for final checks, testing, and putting the automation into service safely.

Important Notes and Compliance

Key operational notes, intended use, spare parts, and conformity requirements.

Safety, Storage, and General Precautions

Storage and Handling Guidelines

Recommendations for storage temperatures, humidity, and careful handling during transport.

Long-Term Stop and Maintenance

Guidelines for disassembly, stop, and maintenance by skilled technicians.

Guarantee and Manufacturer Responsibility

Information on the warranty period and limitations of manufacturer responsibility.

General Safety and Usage Precautions

Instructions on proper use, environmental considerations, and safety measures during installation and operation.