Seac PARTNER - Free Diving Measurement

10
5. Repeat steps 3 and 4. The selection sequence is as follows:
Unit
Safe dive depth Safe dive time (minutes, seconds);
6. Press “A” to exit the setting mode
when you have finished.
• Safe dive depth range: 0.0, 3.0 –
100 m or 0, 10 – 328 ft, default is
0.0 m or 0 ft.
• Safe dive time range: 0’00” -
59’59”; default is 0’00”.
FREE DIVING
Dive time
Surface time
1. Diving depth can be measured in
dive mode.
2. Dive time starts when the
diving depth exceeds 1.2m or 4ft
(“
“ flashing);
3. Surface time turns on when the
user exits the water;
4. Repeat steps 2 and 3. You can measure multiple times (maximum 99 dive times).
All manuals and user guides at all-guides.com