IMPORTANT NOTICE 4–TECSCModels
IMPORTANT NOTICE
This bulletin must be used in conjunction with the Predelivery Check List enclosed in the shrink pack.
WARNING
To obtain limited warranty coverage, predelivery procedures must be performed by an authorized
Sea-Doo watercraft dealer/distributor. Apply all necessary torques as indicated.
N
NN
NO
OO
OT
TT
TE
EE
E:
::
: The information and components/system descriptions contained in this document are correct at
the time of publication. Bombardier however, maintains a policy of continuous improvement of its products
without imposing upon itself any obligation to install them on products previously manufactured. Due to
late changes, there might be some differences between the manufactured product and the descriptions
and/or specifications in this document. Bombardier reserves the right at any time to discontinue or change
specifications, designs, features, models or equipment without incurring obligation. The illustrations in
this document show the typical construction of the different assemblies and may not reproduce the full
detail or exact shape of the parts. However, they represent parts that have the same or similar function.
The content of this bulletin is designed as a guideline only. All mechanics performing predelivery
procedures should have attended the current model year service training. Further information or inquiries
should be directed to your distributor service representative and/or specific Shop Manual sections. Please
complete the Predelivery Check List for each watercraft and retain a customer signed copy. Make sure
the customer receives the Operators Guide, Predelivery Check List signed copy and Safety Videocassette.
2 / 15 2004-1 Predelivery
To Next Page
Loading...