151
BBeeeeppeerr CCooddee IInnffoorrmmaattiioonn
BBeeeeppeerr CCooddeess DDeessccrriippttiioonn
1 long beep
(while installing tether
cord on watercraft
engine cut-off switch)
BBaadd D.E.S.S. ssyysstteemm ccoonnnneeccttiioonn..
Reinstall tether cord cap correctly on the engine
cut-off switch.
WWrroonngg D.E.S.S. kkeeyy..
Use a tether cord that has been programmed for the
watercraft.
DDeeffeeccttiivvee D.E.S.S. kkeeyy..
Use another tether cord with programmed D.E.S.S.
key.
DDeeffeeccttiivvee eennggiinnee ccuutt--ooffff sswwiittcchh..
Refer to an authorized Sea-Doo dealer.
IImmpprrooppeerr ooppeerraattiioonn ooff EECCMM oorr ddeeffeeccttiivvee wwiirriinngg
hhaarrnneessss..Seek service from an authorized Sea-Doo
dealer, repair shop, or person of your own choosing
for maintenance, repair, or replacement. Please
refer to the
US EPA Emission-Related Warranty
contained herein for information about warranty
claims.
A 2 seconds beep
every 15 minutes
interval
EEnnggiinnee mmaannaaggeemmeenntt ssyysstteemm ffaauulltt..
Seek service from an authorized Sea-Doo dealer,
repair shop, or person of your own choosing for
maintenance, repair, or replacement. Please refer to
the
US EPA Emission-Related Warranty
contained
herein for information about warranty claims.
iiBBRR ssyysstteemm ffaauulltt..
Refer to an authorized Sea-Doo dealer.
A 2 seconds beep
every 10 minutes
interval
LLooww ffuueell lleevveell..
Refill fuel tank. If problem persists, refer to an
authorized Sea-Doo dealer.
MONITORING SYSTEM
To Next Page
Loading...
