SeaDoo SPARK 2022 Series User Manual

57
TTRRIIXXXX MMOODDEELLSS
1. Handlebar
2. Engine START/STOP Button
3. Engine Cut-Off Switch
4. Throttle Lever
5. iBR Lever (intelligent Brake and Reverse) (Models with iBR)
6. Mode Button
7. Variable Trim System (VTS) Button (Trixx Models)
HHaannddlleebbaarr
The handlebar controls the direction
of the watercraft. During forward oper-
ation, turning the handlebar to the
right steers the watercraft to the right
and inversely.
WWAARRNNIINNGG
CChheecckk hhaannddlleebbaarr aanndd ccoorrrreessppoonndd--
iinngg sstteeeerriinngg nnoozzzzllee ooppeerraattiioonn bbee--
ffoorree ssttaarrttiinngg.. NNeevveerr ttuurrnn
hhaannddlleebbaarr wwhhiillee ssoommeeoonnee iiss nneeaarr
tthhee rreeaarr ooff tthhee wwaatteerrccrraafftt.. KKeeeepp
aawwaayy ffrroomm pprrooppuullssiioonn ssyysstteemm..
When operating in reverse, steering
direction is reversed. Turning the
handlebar to the right while backing
up steers the watercraft to the left.
EEnnggiinnee SSTTAARRTT//SSTTOOPP BBuuttttoonn
The engine START/STOP button is lo-
cated on the LH handlebar.
CONTROLS

SeaDoo SPARK 2022 Series Specifications

General

Engine Type	Rotax 900 ACE
Horsepower	60 hp / 90 hp
Displacement	899 cc
Hull Material	Polytec
Type	Recreational
Fuel Capacity	7.9 US gal
Seating Capacity	2 or 3
Brake System	iBR (Intelligent Brake and Reverse)
Fuel Type	87 Octane
Length	110 inches
Dry Weight	405 lb (2up) / 428 lb (3up)