Seaga ENVISION ENV5 - INTRODUCTION; EQUIPMENT INSPECTION

2Revision 1.EL980 22.2
INTRODUCTION
Congratulaons on the purchase of your EnVision vending machine. This vending machine has been designed
to give you many years of dependable service. It requires lile maintenance and is easy to set up and operate.
READ THIS MANUAL COMPLETELY
Your vending machine is designed to operate simply and reliably, but to take full advantage of your vendor,
please read this owner’s manual thoroughly. It contains important informaon regarding installaon and
operaons, as well as a brief trouble- shoong guide.
EQUIPMENT INSPECTION
Aer you have received your vendor and have removed the packaging, place it on a secure surface for further
inspecon. Note: Any damages that may have occurred during shipping must be reported to the delivery
carrier immediately. Reporng damages and the seeking of restuon is the responsibility of the equipment
owner. The factory is willing to assist you in this process in any way possible. Feel free to contact our Customer
Care Department with quesons you may have on this process.
It is important that you keep the original packaging for your vending machine at least through the warranty
period. If your machine needs to be returned for repair, you may have to purchase this packaging if it is not
retained.
Once you have your vendor located, we suggest that you keep this manual for future reference, or you
can view this manual online at www.seaga.com. Should any problems occur, refer to the secon entled
“TROUBLESHOOTING”. It is designed to help you quickly idenfy a problem and correct it.
seaga.com
Seaga Manufacturing, Inc.
700 Seaga Drive Freeport, IL 61032 U.S.A.
815.297.9500 Opon 1
815.297.1758 Fax
email: customercare@seaga.com