Need help?Do you have a question about the Seaga JDL-2 COMBO and is the answer not in the manual?
Emphasizes the importance of reading the manual for full vendor advantage.
Guidelines for inspecting the vending machine upon receipt and checking for damages.
Details technical specifications for the Snack and Beverage units.
Important warnings regarding operating environment and voltage.
Describes the two-cabinet system and the components of Snack and Beverage Vendors.
Steps for receiving, inspecting, unpacking, and testing the vending machine.
Instructions on how to operate the T-handle locks for the snack and beverage units.
How to screw the snack and beverage units together for safety.
Connecting the main harness and refrigeration harnesses between units.
Instructions for unlocking, sliding out, and loading product trays in the snack unit.
Guidance on loading wide and narrow products into snack unit trays.
Procedures for removing, aligning, and adjusting coil rotation for proper vending.
Pictorial view of vending possibilities and factory product/group settings.
Instructions for loading beverages using the auger and retainer system.
Explains the LCD display's formats in Sales Mode and operational messages.
How to enter and adjust machine operations via Service Mode.
Navigation keys and their functions within Service Mode.
How to enter Service Mode by pressing the MENUS button on the VMC board.
Visual representation of the Service Mode menu structure and options.
Steps for setting prices for All Items, Row, or individual Selections.
Steps to set prices for all items simultaneously.
Detailed steps for setting coupon values by item, row, or selection.
Steps to set token values by item, row, or selection.
Explanation of combos and how to set them up.
Instructions for setting calorie information for items.
Configuration for lottery rate and enabling.
How to view and reset cash counters.
How to prime the changer with coins.
Overview of configuration sub-menus.
Procedures for setting the date, time, and DST.
Instructions for configuring health safety settings.
Steps to change the display language.
Setting the item type for all items, rows, or selections.
Accessing advanced features with a password.
Instructions for enabling or disabling audible beeps.
Setting the optics disable feature.
Configuring the motor type.
Overview of available options.
Enabling/disabling forced vend functionality.
Configuring multi-vend functionality for purchasing multiple items.
Setting the machine to free vend mode.
Turning the scrolling display message on/off.
Displaying factory default temperature set points.
Adjusting drop sensor sensitivity for beverage lanes.
Setting discounted prices for all items.
Setting discounted prices for items by row.
Setting discounted prices for items by selection.
Setting the coin tube value to trigger the exact change message.
Setting the value for unconditional acceptance of coins/bills.
Setting the maximum change limit.
Setting the VMC to shut down at specific times.
Configuring shutdown times for all items.
Configuring shutdown times for specific rows.
Configuring shutdown times for specific selections.
Setting higher temperatures during off-peak hours to save energy.
Changing temperature units from Fahrenheit to Celsius.
Changing currency display from $ to Rs.
Contains diagnostic tests and settings.
Testing the machine's relays.
Lists VMC errors, descriptions, and possible solutions.
Lists motor errors, descriptions, and possible solutions.
Information and caution regarding vend motors.
Overview of payment systems.
Functionality and acceptance of coins.
Initial loading and priming of coin tubes.
How to dispense coins from tubes for inventory.
Steps to disconnect power and remove the coin changer.
Functionality and acceptance of paper currency.
How to retrieve bills from the collection box.
Steps to disconnect power and remove the bill validator.
Procedures for clearing jams within the bill validator.
Accessing and removing the refrigeration deck.
Instructions for cleaning the condenser fins.
Explanation of the refrigeration system and its components.
Frequently asked questions about product pricing, payment, and currency.
Questions about environment, condenser cleaning, and temperatures.
Questions about product vending and display/keypad issues.
FAQs regarding keypad responsiveness and accuracy.
Exploded view of the Snack Unit (JDLS) and its parts list.
Exploded view of the Snack Unit Door and its parts list.
Exploded view of the Beverage Unit and its parts list.
Exploded view of the Beverage Unit Door and its parts list.
Exploded view of the Dispenser Assembly and its parts list.
Exploded view of the Payment System Assembly and its parts list.
Exploded view of the 4-Selection Tray Assembly and its parts list.
Exploded view of the 8-Selection Tray Assembly and its parts list.
Exploded view of the Refrigeration Deck and its parts list.
Diagram showing electrical connections for the refrigeration deck.
Details the warranty terms and conditions.
General| Brand | Seaga |
|---|---|
| Model | JDL-2 COMBO |
| Category | Vending machines |
| Language | English |
To Next Page