Seaga JDL-2 COMBO - Diagnostic Tests; Test Modes Overview; Test Relays

49JDL V1.0 8 2022
9. ALL ITEMS
This funcon tests all motors in sequence automacally. To stop the test, press * to exit.
NOTE: All selecons should be empty prior to performing this test.
1. Press Service Mode Buon
2. Press 9 for Selecon motor test menu
3. Press * to exit to previous menu
10. TEST MODES
This menu contains diagnosc tests and sengs for the following systems:
• Test Relays • Manual Defrost
• Opcs • Door Switch
• Log • All Aux Items
• On Door • All Items
TEST RELAYS
1. Press Service Mode Buon
2. Press 0 for Test Modes
3. Press 1 to test relays
4. Press 1 to test Relay1
5. Press 1 to toggle relay ON/OFF
6. Press 2 to test Relay2
7. Press 2 to toggle relay ON/OFF
8. Repeat steps 6 and 7 for remaining relays 3 thru 6
9. Press * twice to exit to previous menu
OPTICS
Note: Not used on this model
LOG
Note: Do not use unless requested by trained personnel
1. Press Service Mode Buon
2. Press 0 for Test Modes
3. Press 3 for Log
4. Use number keys to enter password (2314) to view log
ON DOOR
1. Press Service Mode Buon
2. Press 0 for Test Modes
3. Press 4 for On Door
4. Press 4 to toggle SHOW ERRORS/OFF when door opens
5. Press * to exit to previous menu