Seaga JDL-2 COMBO - Service Mode; Service Mode Navigation

20JDL V1.0 8 2022
1 2 3
4 5 6
7 8 9
* 0 #
KEYPAD
* = Exit or Next
# = Save
SERVICE MODE
The operaon of the machine can be adjusted by entering service mode by pressing the MENUS buon on the
VMC circuit board (see Figure 21 for reference) and then accessing the appropriate operaon. Price seng,
audit display and operang modes can be read and adjusted from here. The user can also perform tests on the
machine through this mode. Note: any Credit will be cancelled on entry to Service Mode
SERVICE MODE NAVIGATION
Use the 0 through 9 keys to access the various menus and sub-menus.
Use the “*” key on the keypad to Exit without changing or to go back (Previous).
Use the “#” key on the keypad to Save.