Seaga JDL-2 COMBO - Pricing and Promotions; Service Mode - Price Program; All Items Pricing

23JDL V1.0 8 2022
SERVICE MODE
1. PRICE PROGRAM
Price Program is used to set the prices for All Items, by Row or by individual Selecon. Save me and set
All Items to the most common price, going back to Row or Selecon for dierent prices as required.
ALL ITEMS
1. Press Service Mode Buon
2. Press 1 for Price Program
3. Press 1 for All Items
4. Use number keys to enter new price
5. Press # to Save changes
6. Press * to exit to previous menu
ROW
1. Press Service Mode Buon
2. Press 1 for Price Program
3. Press 2 for Row
4. Use number keys to enter Row number
5. Use number keys to set new price, including cents.
6. Press # to Save changes
7. Press # to go to Next row or
8. Press * to exit to previous menu
SELECTION
1. Press Service Mode Buon
2. Press 1 for Price Program
3. Press 3 for Selecon
4. Use number keys to enter Selecon number
5. Use number keys to set new price, including cents.
6. Press # to Save changes
7. Press # to go to Next selecon or
8. Press * to exit to previous menu
COUPON
IMPORTANT: This opon requires a programmed validator. Up to ve dierent coupon values can be set.
In sales mode, once a coupon is accepted, no further coupons will be accepted unl a successful vend
has been made. If no value is set, coupons will be shown as free vends. If using both coupons and tokens,
there are only ve selecon combinaons available. For example, if Coupon1 is set for “All Items”, Token1
is also set for “All Items”.