Need help?Do you have a question about the Seaga INF5S and is the answer not in the manual?
Technical specifications for domestic 115V models, including 5-wide configurations.
Technical specifications for international 230V models, including 4-wide and 5-wide.
Specifies the necessary AC voltage and amperage for domestic and international models.
Guide to navigating menus and sub-menus using the keypad in Service Mode.
Visual representation of the Service Mode menu structure and available options.
Procedure to set coupon values for specific rows of selections.
Procedure to set coupon values for individual items or selections.
Instructions for setting token values accepted by the machine's changer.
Procedure to set token acceptance values for specific rows.
Allows setting different prices for selections based on time or day.
Sets discount prices for selections on a per-row basis.
Sets discount prices for individual selections.
Lists VMC errors, their descriptions, and possible solutions.
Troubleshooting for motor-related issues like open connections, shorts, or jams.
Troubleshooting for temperature sensor faults.
Troubleshooting for issues with the vend sensor system.
Troubleshooting for communication, sensor, and jam errors with the coin changer.
Troubleshooting for communication, stacker, motor, and sensor errors with bill validators.
Troubleshooting for communication or general errors with card readers.
Troubleshooting steps for a blank or non-functional front display panel.
Steps to diagnose and resolve issues where selections fail to vend.
Troubleshooting for unintended multiple vends from a single selection.
Troubleshooting for simultaneous multiple vends across selections.
Steps to resolve issues with the machine not accepting bills or coins.
Troubleshooting steps for vending machines that are not cooling properly.
Troubleshooting tray rearrangement issues causing selection failures.
Diagnosing why the machine accepts change but not bills.
Troubleshooting persistent bill acceptance issues without exact change indication.
Addressing issues where the machine accepts $1 bills but not $5 bills.
Troubleshooting acceptance of new $5 bills, potentially due to currency updates.
Troubleshooting 'Vend Error' messages related to vend motor issues.
Troubleshooting a dead or intermittent display while the machine functions.
Troubleshooting steps for vending machines failing to cool properly.
Important safety warnings regarding high voltage and component replacement.
General| Type | Snack and beverage vending machine |
|---|---|
| Power Supply | 115 VAC, 60Hz |
| Voltage | 115 VAC |
| Power Consumption | Varies by model |
| Cooling System | Refrigeration system for cooling beverages |
| Display | LCD |
To Next Page
