2JDL V1.0 8 2022
INTRODUCTION
Congratulaons on the purchase of your vending machine. This vending machine has been designed to give
you many years of dependable service. It requires lile maintenance and is easy to set up and operate.
READ THIS MANUAL COMPLETELY
Your vending machine is designed to operate simply and reliably, but to take full advantage of your vendor,
please read this owner’s manual thoroughly. It contains important informaon regarding installaon and
operaons, as well as a brief trouble- shoong guide.
EQUIPMENT INSPECTION
Aer you have received your vendor and have it out of the box, place it on a secure surface for further in-
specon. Note: Any damages that may have occurred during shipping must be reported to the delivery carrier
immediately. Reporng damages and the seeking of restuon is the responsibility of the equipment owner.
The factory is willing to assist you in this process in any way possible. Feel free to contact our Customer Care
Department with quesons you may have on this process.
It is important that you keep the original packaging for your vending machine at least through the warranty
period. If your machine needs to be returned for repair, you may have to purchase this packaging if it is not
retained.
Vendor must be located a minimum of ve(5) inches away from walls and obstrucons on the right side to
allow the doors to fully open for loading products and maintenance purposes.
Once you have your vendor located, we suggest that you keep this manual for future reference, or you
can view this manual online at www.seaga.com. Should any problems occur, refer to the secon entled
“TROUBLESHOOTING”. It is designed to help you quickly idenfy a problem and correct it.
seaga.com
For Service and Customer Care in the US:
8:00 a.m. - 5:00 p.m. CST. Mon thru Fri
815.297.9500 opon 1
email: customercare@seaga.com
Seaga Manufacturing, Inc.
700 Seaga Drive Freeport, IL 61032 U.S.A.
To Next Page
Loading...
