Seaga JDL-2 COMBO - Unit Settings; Degrees Setting; Currency Setting

48JDL V1.0 8 2022
37. Press 9 for Enable menu
38. Press 9 to toggle ON/OFF
39. Press # to save changes
40. Press * to exit to previous menu
PAIR MOTORS
Note: Not applicable. No Motors should be paired.
DEGREES
This funcon allows you to change from Fahrenheit to Celsius.
1. Press Service Mode Buon
2. Press 6 for Advanced Menu
3. Use number keys to enter Password (2314)
4. Press 8 for Degrees menu
5. Press 8 to toggle between F and C
6. Press # to save changes
7. Press * to exit to previous menu
CURRENCY
This funcon allows you to change from Dollars to Rupees.
1. Press Service Mode Buon
2. Press 6 for Advanced Menu
3. Use number keys to enter Password (2314)
4. Press 0 for Currency menu
5. Press 0 to toggle between $ and Rs
6. Press # to save changes
7. Press * to exit to previous menu
7. MOTORS
This funcon displays the motor count. It is a useful, quick diagnosc tool in case of selecon failure and
can point out a motor issue if the count is not correct.
1. Press Service Mode Buon
2. Press 7 for Motor count display menu
3. Press * to exit to previous menu
8. TEST VEND
This funcon tests the motor on one specied selecon.
1. Press Service Mode Buon
2. Press 8 for Selecon motor test menu
3. Use number keys to enter selecon to test and wait
4. Repeat for any other selecons
5. Press * to exit to previous menu