Seaga JDL-2 COMBO - Energy Saving Mode; Energy Savings Configuration

47JDL V1.0 8 2022
37. Press 9 for enable menu
38. Press 9 to toggle On/O
39. Press # to save changes
40. Press * to exit to previous menu
ENERGY SAVINGS
Use this menu to set a non-health safety machine to run at a higher than normal temperature during set
mes. This will save energy during o peak hours of sales. Two intervals are available.
1. Press Service Mode Buon
2. Press 6 for Advanced Menu
3. Use number keys to enter Password (2314)
4. Press 6 for Energy Savings
5. Press 1 for Interval1 (2 for Interval2, and so on)
6. Press 4 for Day menu
7. Press 1 for Every Day
8. Press 1 to toggle All Days ON/OFF
9. Press # to save changes
10. Press * to exit to previous menu
11. Press 2 for Monday menu
12. Press 2 to toggle Monday ON/OFF
13. Press # to save changes
14. Press * to exit to previous menu
15. Use numbers 3-8 to complete the other days of the week using steps 11 thru 14.
16. Press * to exit to previous menu
17. Press 5 for Start Time menu
18. Press 5 again or press #
19. Press # to edit
20. Use number keys to enter Start Time in 12-hr me format (HH:MM:SS) AM/PM
21. Press # to save changes
22. Press * exit to previous menu
23. Press 6 for Stop Time menu
24. Press 6 again or press #
25. Press # to edit
26. Use number keys to enter Stop Time in 12-hr me format (HH:MM:SS) AM/PM
27. Press # to save changes
28. Press * to exit to previous menu
29. Press 7 to enter Storage Temp (default is 62°F)
30. Press 7 to edit Storage Temp (39°F to 62°F)
31. Press # to save changes
32. Press * to exit to previous menu
33. Press 8 for Lighng menu
34. Press 8 to toggle Lighng ON/OFF
Note: Lighng ON turns lights o during Energy Saving interval
Lighng OFF leaves lights on during Energy Saving interval
35. Press # to save changes
36. Press * to exit to previous menu