Seaga JDL-2 COMBO - Clearing Bill Jams

60JDL V1.0 8 2022
Four (4) Mounng Nuts
(4th Nut is horizontally across from
upper nut)
f. Remove Bill Validator
Clearing Bill Jams
It is possible that a torn or damaged bill can jam within the Bill Validator, pung it out of service.
1. To Clear a Jam.
a. Remove Bill Collecon Box as instructed in Bill Retrieval and inspect for a jammed bill
b. Remove bill jam, and reassemble
c. If no jam was found in the Bill Collecon Box, li up on the metal bar at the boom of the bill
validator and pull the lower unit out towards you.