Seaga JDL-2 COMBO - Frequently Asked Questions; Keypad Troubleshooting

66JDL V1.0 8 2022
3. Check connecon on VMC labeled keypad and ensure that proper connecon is made.
Transporng and installing:
Q. Do I have to test my equipment before placing it on locaon? Must I disassemble to transport to the
locaon? Is there a way to do a general check of equipment without full assembly?
A. We suggest full tesng prior to the unit being moved to the locaon. Why? It gets you familiar with
the machine so that you look professional and ecient when at the locaon seng up the machine.
Complete assembly of the machine for tesng is required.
Q. Can the snack and drink machine be transported while aached? Loaded?
A. The units should never be transported aached. Addionally, transporng with product loaded
voids manufacturer’s warranty and can damage your equipment. Transport units unaached and
empty of product/change only.
Q. Can I place the drink unit on its side for transport?
A. Never place the drink machine in any other posion but upright. There are numerous components
that can be jostled out of place, becoming very problemac for you. Once the machine is set
in place, the compressor needs to rest for a minimum of 24 hours prior to running in order for the
oils in the compressor to return to their non-threatening posion.
Q. Are the drink shims pre-installed at the factory?
A. Yes, but they may have moved during shipping and should be reviewed prior to loading.
Q. Are there dierent coils that will hold a larger number of products (more product spaces)?
A. For other coil opons, please call Seaga Customer Care.
Q. My Drink Unit door will not line up and lock. What can I do?
A. This may be caused by a machine that is not level, perhaps placed on an uneven oor. We suggest
you put all the units together and securely bolt them together as per the instrucons. This should
resolve any t issues.
Q. Should I use a surge protector for the equipment?
A. A surge protector is a small investment that can save your equipment from less than ideal power
situaons. We recommend using a surge protector.
FREQUENTLY ASKED QUESTIONS
Keypad
What do I do if my keypad isn’t responding, displays double the number pressed or displays a dierent
number?
1. If not responding, check the connecon at the VMC to make sure it’s secure. Examine the whole
keypad harness to make sure there is no damage to the harness.
2. If the wrong number or a double number appears, locate the mounng plate inside the machine,