Seaga JDL-2 COMBO - Specific Configuration Options; Optics Disables; Motor Type

34JDL V1.0 8 2022
OPTICS DISABLES
Note: Must be set to ON for this model
1. Press Service Mode Buon
2. Press 4 for Conguraon
3. Press 0 for Advanced Cong
4. Use number keys to enter Password (2314)
5. Press 2 for Opcs Disables menu
6. Press 2 to toggle ON/OFF to set to ON
7. Press # to save changes
8. Press * to exit to previous menu
MOTOR TYPE
Note: Must be set to 3-Wire for this model
1. Press Service Mode Buon
2. Press 4 for Conguraon
3. Press 0 for Advanced Cong
4. Use number keys to enter Password (2314)
5. Press 3 for Motor Type menu
6. Press 3 to toggle to 3-Wire (other opons: Solenoid, 2-Wire, 2-Wire 1ms or 3-Wire Slow)
7. Press # to save changes
8. Press * to exit to previous menu
TEMP
Note: Must be set to COLD.
1. Press Service Mode Buon
2. Press 4 for Conguraon
3. Press 0 for Advanced Cong
4. Use number keys to enter password (2314)
5. Press 4 for Temp menu
6. Press 4 to toggle Snack, Cold or Cold H&S to set to Cold
7. Press # to save changes
8. Press * to exit to previous menu
SEL STYLE
Note: Must be set to 3-Digit for this model
1. Press Service Mode Buon
2. Press 4 for Conguraon
3. Press 0 for Advanced Cong
4. Use number keys to enter password (2314)
5. Press 5 for Sel Style
6. Press 5 to toggle 3-digit, 2-Dgt to set to 3-digit
7. Press # to save changes
8. Press * to exit to previous menu