Seaga JDL-2 COMBO - Advanced Features; Advanced Features Access; Beep Enable

33JDL V1.0 8 2022
Should you want to link your own specic selecons, go directly to Custom Space to Sales without seng
the enre machine to one of the choices (By2’s, Whole Row…etc), or go into the StS menu and set it to
OFF or Custom.
If you have a popular brand of water that keeps selling out before you can restock, it may be useful to
set Custom StS for two selecons to work in tandem, make more sales by having fresh product readily
available in a larger capacity.
As an example, loading 16 oz. boled water in selecons 150 and 151.
1. Press Service Mode Buon
2. Press 4 for Conguraon
3. Press 8 for StS
4. Press 8 to toggle to seng Custom or OFF
5. Press # to Save changes
6. Press * to exit to previous menu
7. Press 9 to go to Custom Space to Sales (StS menu will change to Custom automacally)
8. Use number keys to Enter Selecon (in our example, 150)
9. Press # to add a link
10. Use number keys to enter another selecon
11. Press # to save changes
12. Press # to add another selecon repeat steps 10 thru 12 unl all desired links are made
13. Press * to exit to previous menu
Now, both 150 and 151 are linked as 150 but the machine will deliver product from one then the other to
provide equal distribuon.
ADVANCED*
A password is required to enter this menu. The factory default password is 2314. The following sub-menus
are available under this sub-menu:
• Beep Enable • Aux Menu
• Opcs Disables • Defrost Menu
• Motor Type • Locker Light
• Temp • Aux USD
• Selecon Style • Alt Card Rules
BEEP ENABLE
1. Press Service Mode Buon
2. Press 4 for Conguraon
3. Press 0 for Advanced Cong
4. Use number keys to enter Password (2314)
5. Press 1 for Beep Enable menu
6. Press 1 to toggle ON/OFF
7. Press # to save changes
8. Press * to exit to previous menu