Seaga JDL-2 COMBO - Limited Warranty

78JDL V1.0 8 2022
LIMITED WARRANTY
Seaga warrants to the original purchaser that the equipment is free from defects in material and factory
workmanship for a period of one (1) year from date of shipment.
This warranty applies only if the equipment has been serviced and maintained in strict accordance with the
instrucons presented in the Operator’s Manual and no unauthorized service, repair, alteraon or disassembly has
been performed. Any defects caused by improper power source, poor water quality or pressure, an installed water
ltraon system not fully funconing, abuse of the product, accident, alteraon, vandalism, improper service and
maintenance schedules, neglecng to de-scale and sanize on a regular basis, use of products or ingredients not
allowed in the machine, corrosion due to use of non-approved detergents or cleaning soluons, or damage incurred
during return shipment will not be covered by this warranty. Further, equipment that has had the serial number
removed, altered or otherwise defaced will not be covered by this warranty.
Lighng components, refrigerant, glass, paint, decals, fuses, lters or hygiene replacement parts, labor and/or
installaon are not covered by this warranty.
Follow proper maintenance procedures and use of equipment, as described in the Operator’s Manual provided on
Seaga’s web site at seaga.com, which include but are not limited to:
• Cleaning of equipment including regular maintenance
• Proper installaon and locaon of equipment with respect for the indicated temperature and
humidity levels
• Proper use of equipment including loading, programming and setup
THIS WARRANTY IS EXCLUSIVE AND IS GIVEN BY SEAGA AND ACCEPTED BY BUYER IN LIEU OF ANY AND ALL
OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ALL WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ALL SUCH OTHER WARRANTIES ARE
HEREBY EXPRESSLY DISCLAIMED BY SEAGA AND WAIVED BY BUYER. Seaga neither assumes nor authorizes any
person to assume for it any obligaon or liability in connecon with the sale of said unit(s) or any part(s) thereof.
Repair or replacement of proven defecve parts is limited to manufacturing defects demonstrated under normal
use and service during warranty period. Contact Seaga’s Customer Care Department to be assigned a Return
Authorizaon (RA) number. Seaga requires complete informaon including the serial number(s) of the machine(s),
date of purchase and descripon of the part and/or suspected defect. Seaga may also be contacted, with complete
informaon, by phone: 815.297.9500, by fax: 815.297.1700 and also by email: customercare@seaga.com
Send defecve part(s), assembly or complete unit, Aenon to the RA Number, prepaid or delivered to:
Seaga will repair or replace, at our opon, any covered part which meets the provisions herein during the warranty
period. It is our discreon to replace defecve parts with comparable parts. Seaga reserves the right to make
changes or improvements in its products without noce and without obligaon, and without being required to make
corresponding changes or improvements in equipment already manufactured or sold.
700 Seaga Drive
Freeport IL 61032
SMI2456321