Seaga JDL-2 COMBO - Configuration Menu; Configuration Details; Date;Time Settings; Health Safety Settings

30JDL V1.0 8 2022
4. CONFIGURATION
The following sub-menus are included in the Conguraon Menu:
• Date/Time • Selecon – Type
• Health Safety • Auto Reinstate
• Language • StS
• All Items – Type • StS Custom
• Row – Type • Advanced Cong*
DATE/TIME
1. Press Service Mode Buon
2. Press 4 for Conguraon
3. Press 1 for Date/Time
4. Press 1 to change Date (MM/DD/YYYY)
5. Press # to Edit Date
6. Use number keys to enter Date in format shown
7. Press # to Save changes
8. Press * to exit to previous menu
9. Press 2 to change Time (HH:MM:SS) AM/PM
10. Press # to Edit Time
11. Use number keys to enter Time in format shown
12. Press # to Save changes
13. Press * to exit to previous menu
14. Press 3 to change DST (Daylight Savings Time)
15. Press 3 to toggle between OFF, Australia, Europe, or North America
16. Press # to Save changes
17. Press * to exit to previous menu
HEALTH SAFETY
Not applicable. All Items should be OFF.
1. Press Service Mode Buon
2. Press 4 for Conguraon
3. Press 2 for Health Safety
4. Press 1 to change Upper Zone
5. Press 1 to change All Items
6. Press 1 to toggle On/O to set to OFF
7. Press # to Save changes
8. Press * to exit to previous menu
9. Press * to exit to previous menu
10. Press 2 to change Lower Zone
11. Press 1 to change All Items
12. Press 1 to toggle On/O to set to OFF
13. Press # to Save changes
14. Press * to exit to previous menu