Seaga JDL-2 COMBO - Token Settings

25JDL V1.0 8 2022
8. Press * to exit to previous menu
9. Press 3 to enter a Selecon
10. Use the number keys to enter a Selecon number
11. Press 1 to toggle Item On/O
12. Press # to save the seng
13. Press * to exit to previous menu
14. Press 4 to enter Coupon Value menu
15. Press # to edit Coupon1 value
16. Use the number keys to enter Coupon1 value
17. Press # to save changes, or * to delete Coupon value then # to Save
18. Press * to exit to previous menu
19. Select Coupon2 – 5 to connue or Press * to exit to previous menu
TOKEN
IMPORTANT: This opon requires a programmed changer and allows you to set the value of tokens
accepted. Note: If Space to Sales Whole Machine is On and you are seng Tokens by Row, the Row must
be set to Row 1. If using both coupons and tokens, there are only ve selecon combinaons available.
For example, if Coupon1 is set for “All Items”, Token1 is also set for “All Items”.
TOKEN ALL ITEMS
1. Press Service Mode Buon
2. Press 1 for Price Program
3. Press 5 for Tokens
4. Press 1 for Token1 (or corresponding number for addional tokens, up to Token5)
5. Press 1 for All Items
6. Press 1 to toggle On/O
7. Press # to save changes
8. Press * to exit to previous menu
9. Press 4 to enter Token Value menu
10. Press # to edit
11. Use number keys to enter Token1 value
12. Press # to save changes, or * to delete Coupon value then # to Save
13. Press * to exit to previous menu
14. Select Token2 – 5 to connue or press * to exit to previous menu
TOKEN BY ROW
1. Press Service Mode Buon
2. Press 1 for Price Program
3. Press 5 for Tokens
4. Press 1 for Token1 (or corresponding number for addional coupons, up to Token5)
5. Press 1 for All Items
6. Press 1 to toggle to O
7. Press # to save changes
8. Press * to exit to previous menu
9. Press 2 to enter a Row Number