Seaga JDL-2 COMBO - Bill Validator Operations; Bill Validator Functionality; Bill Retrieval

58JDL V1.0 8 2022
d. Tilt the Discriminator assembly forward and li o main housing. Note: the discriminator will sll be
aached by a cable.
e. Loosen the three (3) Mounng Screws
f. Li Changer and remove.
BILL VALIDATOR
The Bill Validator allows your customers to pay for their purchase with paper currency. Your Bill Validator
is installed at the factory, and is set to validate $1 and $5 bills, but will not accept bills if the coin tubes are
empty. The Bill Validator veries, accepts and stores paper currency but change is given in coins only.
Bill Validator Capacity
The Bill Storage Box will hold approximately 300 bills.
Bill Retrieval
The bills your customers spend are kept in the Bill Collecon Box.
1. To Retrieve Bills.
a. Unlock and open the Front Door
b. Open door located on top of bill collecon box and li out bills
c. Close top door on bill collecon box aer bills are retrieved