44JDL V1.0 8 2022
6. Press 1 to toggle ON/OFF
7. Press # to save changes
8. Press * to exit to previous menu
9. Press 2 and use number keys to enter dollar amount
10. Press # to save changes
11. Press * to exit to previous menu
SHUTDOWN
This menu sets the VMC to shut down All Items, by Row or by Selecon, based on four (4) me of day
intervals. If the me falls within one of these intervals and the enre machine has been selected for
shutdown, then the message, “Vending Operaon to Resume at hh.mm,” will be displayed.
If a row or individual selecon has been set for Shutdown, the same message displays once every me the
customer makes that selecon or selecons (row).
NOTE: The correct me and date must be set so that the shutdown intervals work correctly. See Time
and Date secon of this manual. Also, for any given day these four me intervals may overlap each other.
For each interval, the VMC can be programmed from no days up to every day of the week on which the
specied shutdown me intervals are acve.
SHUTDOWN BY ALL ITEMS
1. Press Service Mode Buon
2. Press 6 for Advanced Menu
3. Use number keys to enter Password (2314)
4. Press 5 for Shutdown
5. Press 1 for Interval1 (2 for Interval2, and so on)
6. Press 1 to for All Items
7. Press 1 to toggle ON/OFF
8. Press # to save changes
9. Press * to return to previous menu
10. Press 4 for Day menu
11. Press 1 for Every Day
12. Press 1 to toggle All Days ON/OFF
13. Press # to save changes
14. Press 2 for Monday menu
15. Press 2 to toggle Monday ON/OFF
16. Press # to save changes
17. Use numbers 3-8 to complete the other days of the week using steps 14 thru 16.
18. Press * to return to previous menu
19. Press 5 for Start Time menu
20. Press 5 again or press #
21. Press # to Edit
22. Use number keys to enter Start Time in 12-hr me format (HH:MM:SS) AM/PM
23. Press # to save changes
24. Press * to return to previous menu
25. Press 6 for Stop Time menu
26. Press 6 again or press #
27. Press # to Edit
To Next Page
Loading...
