Need help?Do you have a question about the Seagate Barracuda ST1000DM003 and is the answer not in the manual?
Details the advantages and functionality of the Serial ATA interface for drives.
Summarizes core specifications like capacity, geometry, recording, and physical attributes.
Details power consumption, voltage tolerance, and operating environmental parameters.
Covers drive acoustics, electromagnetic immunity, and agency certifications.
Information on warranty, environmental compliance, and corrosive environment considerations.
Essential safety guidelines for handling drives to prevent ESD damage.
Instructions for configuring the drive and physical mounting procedures.
Details hot-plug capabilities and SATA connector pin definitions.
Lists the standard ATA commands supported by the Barracuda drives.
Explains the 'Identify Device' command and its data structure.
Describes commands for setting features and S.M.A.R.T. drive monitoring.
General| Capacity | 1TB |
|---|---|
| Interface | SATA 6Gb/s |
| Form Factor | 3.5 inch |
| RPM | 7200 RPM |
| Cache | 64MB |
| Average Latency | 4.16ms |
| Weight | 400g |
| Dimensions | 146.99mm x 101.6mm x 20.17mm |
To Next Page