Need help?Do you have a question about the Seagate Barracuda ST2000DM001 and is the answer not in the manual?
Explains Serial ATA advantages over parallel ATA, plug-and-play, and cabling.
Provides quick reference tables for drive specifications across different models.
Details physical dimensions, weight, and cache buffer size for various drive models.
Outlines power requirements, consumption levels, and voltage tolerances for the drives.
Covers operating and non-operating conditions including temperature, humidity, altitude, and shock.
Details the sound power levels produced by the drives during idle and seek operations.
Lists safety and electromagnetic compatibility certifications obtained by the drives.
Provides essential safety guidelines for handling drives to prevent ESD damage during installation.
Details recommended mounting procedures, screw types, and torque specifications for installing the drives.
Explains the pin assignments for SATA signal and power connectors on the drive.
Lists the standard ATA commands supported by the drive for various operations.
Describes S.M.A.R.T. commands for drive health monitoring and failure prediction.
General| Capacity | 2TB |
|---|---|
| Interface | SATA 6Gb/s |
| Form Factor | 3.5 inch |
| Cache | 64MB |
| RPM | 7200 RPM |
| Average Latency | 4.16 ms |
| Transfer Rate | Up to 210 MB/s |
| Power Consumption (Idle) | 5.9W |
| Power Consumption (Operating) | 8.0W |
| Weight | 626g |
| Dimensions (W x D x H) | 101.6mm x 147.0mm x 26.1mm |
To Next Page