To Next PageTo Next Page
Need help?Do you have a question about the Seagate ST8000NM0055 and is the answer not in the manual?
Explains the advantages and functionality of the Serial ATA interface for disk drives.
Provides tables summarizing key drive specifications for quick reference.
Details the formatted capacity and sector information for various drive models.
Describes the recording method and Serial ATA interface technology used by the drives.
Specifies the time taken for the drive to become ready from power-on or standby.
Details the power requirements and consumption levels for the drives.
Outlines the operating and non-operating environmental conditions for the drives.
Specifies the drive's tolerance to shock and vibration during operation and non-operation.
Details the sound power levels generated by the drive during idle and seek operations.
Describes the drive's performance under various radio frequency environments.
Provides information on the drive's annualized failure rate and mean time between failures.
Lists the various safety and agency certifications the drives comply with.
Details compliance with environmental regulations like RoHS and REACH.
Details compliance with China's hazardous substance restrictions for electronic products.
Details compliance with Taiwan's hazardous substance restrictions for electronic products.
Discusses the impact of corrosive environments on drive components and recommendations.
Lists referenced documents for self-encrypting drives and general specifications.
Outlines the terms and conditions for product warranty, repair, and return.
Provides essential precautions for handling drives to prevent electrostatic discharge (ESD) damage.
Details the Serial ATA interface cables and connector pin definitions.
Instructions and precautions for mounting the drive securely in a system.
Provides detailed dimensions and mounting configuration for the drive.
Explains the AES-256 bit data encryption used by the self-encrypting drives.
Details the security providers (Admin SP, Locking SP) and access control mechanisms.
Describes how to lock and unlock the drive's data bands for enhanced security.
Explains the cryptographic erase feature for secure data deletion.
Details Seagate Enterprise SEDs' validation and testing for FIPS 140-2 Level 2 requirements.
Describes the physical security mechanisms and role-based authentication for Level 2 security.
Explains the drive's compatibility with hot-plugging as per SATA Revision 3.2.
Defines the pin functions for the Serial ATA interface and power connectors.
Lists the standard ATA commands supported by the drives.
Details the Identify Device command and its returned information about drive capabilities.
Explains the Set Features command used to control various drive functionalities.
Describes S.M.A.R.T. commands for near-term failure prediction and drive monitoring.
General| Model | ST8000NM0055 |
|---|---|
| Capacity | 8TB |
| Interface | SATA 6Gb/s |
| Form Factor | 3.5 inch |
| RPM | 7200 RPM |
| Cache | 256MB |
| Average Latency | 4.16ms |
| Operating Temperature | 5°C to 60°C |
| Non-Operating Temperature | -40°C to 70°C |
| Workload Rate Limit | 550TB/year |
| Warranty | 5 years |
| Non-Recoverable Read Errors | 1 in 10^15 |
| Power-on Hours | 8760 hours |
| Operating Shock | 70G |
| Non-Operating Shock | 300 Gs, 2ms |
