To Next PageTo Next Page
Need help?Do you have a question about the Seagate ST250DM000 and is the answer not in the manual?
Provides quick reference tables for drive specifications across different models.
Details the formatted capacity, guaranteed sectors, and logical geometry of the drives.
Details performance metrics like seek times, latency, and spinup/standby times.
Outlines power requirements and typical current profiles for various operating states.
Defines operating and non-operating ambient temperature ranges and gradients.
Presents Annualized Failure Rate (AFR) and MTBF specifications.
Provides essential safety guidelines for handling drives to prevent ESD damage.
General| HDD size | 3.5 \ |
|---|---|
| HDD speed | 7200 RPM |
| Interface | Serial ATA |
| HDD capacity | 250 GB |
| Read seek time | 8.5 ms |
| Average latency | 4.16 ms |
| Write seek time | 9.5 ms |
| Start/stop cycles | 50000 |
| HDD number of heads | 1 |
| Track to track seek time | 1.2 ms |
| Storage drive buffer size | 16 MB |
| Plug and Play | Yes |
| Recording density | 1413 kbit/inch |
| Data transfer rate | 4.69 Gbit/s |
| Disks included quantity | 1 pc(s) |
| Operating voltage | 5 / 12 V |
| Operating shock | 70 G |
| Operating altitude | -304.8 - 3048 m |
| Non-operating shock | 350 G |
| Operating vibration | 0.5 G |
| Non-operating altitude | -304.8 - 12192 m |
| Non-operating vibration | 3 G |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 60 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 147 mm |
|---|---|
| Width | 101.6 mm |
| Height | 20 mm |
| Weight | 415 g |
