Sealey G1000I - User Manual

INSTRUCTIONS FOR:
GENERATOR INVERTOR
1000W 230V
MODEL No: G1000I
Original Language Version
© Jack Sealey Limited
G1000I Issue: 1 - 02/07/14

Summary

Safety

General Safety Precautions

Key safety warnings and operational guidelines for safe generator use.

Introduction

Specifications

Preparation

Unpacking

Steps to unpack and inspect the generator for damage or missing parts.

Operation

Pre-Start Checks and Setup

Procedures before starting, including checks and fuel/oil preparation.

Starting and Stopping Procedures

Guide on how to safely start, run, and stop the generator.

Using the Generator and Overload Indicator

Instructions for operating the generator and understanding overload warnings.

Maintenance

General Maintenance Schedule

Overview of periodic maintenance tasks and intervals.

Air Filter Maintenance

Steps for cleaning and replacing the air filter element.

Spark Plug Maintenance

Guidance on checking, cleaning, and adjusting the spark plug.

Fuel Filter and Generator Cleaning

Procedures for maintaining the fuel filter and cleaning the generator unit.

Transportation and Storage

Transportation Guidelines

Safety precautions and methods for transporting the generator.

Storage Recommendations

Best practices for storing the generator for extended periods.

Troubleshooting

Sealey G1000I Specifications

General

Fuel Type	Petrol
Starting Method	Recoil
Output Voltage	230V
Rated Output	900W
Maximum Output	1000W
Starting System	Recoil
Engine Type	4-stroke OHV
Fuel Tank Capacity	2.7L
Outlets	1 x 230V
Power Output	1kW