POWER TOOL STORAGE RACK
MODEL NO: PTSR5
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using this tool rack.
9 Locate tool rack in a suitable area where it will not be an obstruction.
9 Keep the general area clean, uncluttered and ensure there is adequate lighting.
WARNING! Mount tool rack on a at and solid wall such as breeze block that is strong enough to hold fully laden tool rack.
9 The tool rack should be rmly secured to the wall in a suitable location with xings provided.
8 DO NOT attempt to wall mount the tool rack on your own. Obtain assistance or use manual handling equipment.
9 Wall mount the tool rack at such a height that minimises the risk of injury when used.
9 Keep children and unauthorised persons away from the storage area.
8 DO NOT use the tool rack for any purpose other than that for which it is designed.
8 DO NOT site the tool rack out of doors.
8 DO NOT get the tool rack wet or use in damp or wet locations or areas where there is condensation.
8 DO NOT clean the tool rack with any solvents or abrasives which may damage the coated surface.
8 DO NOT overload the tool rack when wall mounted.
9 Ensure that the tool rack is properly and rmly assembled and installed before loading it.
2. INTRODUCTION
Wall mounted rack specically designed for the storage of power tools. Stores up to ve power tools. Shelf space for power tool
battery chargers. Open fronted bays make tools easily accessible. Supplied at packed.
3. SPECIFICATION
Model No.: ..................................................................PTSR5
Dimensions (WxHxD) .............................. 535 x 230 x 300mm
Power tool storage bays ....................................................... 5
Shelves ................................................................................ 2
4. CONTENTS
PTSR5 Issue 1 15/07/19
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
To Next Page
Need help?
General
