If the “LINK ERROR” message does not go away, then
there might be problems for the scan tool to communicate
with the vehicle. Contact your local distributor or the
manufacturer’s customer service department for assistance.
A. Automatic Vehicle Detect
1) Use UP/DOWN scroll button to select All, and press Y button.
Oil Service
►1) All
2) Audi(up to 2000)
3) VW(up to 2000)
4) Seat(up to 2000)
5) Skoda(up to 2000)
All option can be used to detect all VAG vehicles before and
after 2000 automatically.
Automatic Services Detect
The Auto Detect function is used to detect services automatically.
2) Use UP/DOWN scroll button to select Auto Detect and press Y
button to confirm.
Oil Service
►1) Auto Detect
2) Longlife Oil
3) Non Longlife Oil
4) Set Insp. Interval
3) Wait a few seconds till the following screen shows.
To Next Page
Loading...