If you want to continue to set values, use UP/DOWN scroll
button to select Back and press Y button to return to continue
setup. If you want to cancel all setups, use UP/DOWN scroll
button to select Exit and press Y button, or simply press N
button to exit.
12) Wait a few seconds till the “RESET OK!” message comes up.
Press any key to return to Main Menu.
Manual Setup
RESET OK!
Press any key to con.
Oil Service
Back Save Exit
[Back] = Cont. to Set
[Save] = Save Setup
[Exit] = Cancel Setup
Resetting Long Life Oil Service
The Long Life Oil function is used to reset Long Life oil service.
1) Use UP/DOWN scroll button to select Long Life Oil from the
menu, and press Y button.
To Next Page
Loading...