To Next PageTo Next Page
Need help?Do you have a question about the Sealey WC06 and is the answer not in the manual?
General warnings, cautions, and advice for safe operation, maintenance, and proper use of the wheel chock.
Step-by-step instructions for attaching mounting plates and securing the wheel chock to a surface.
General warnings, cautions, and advice for safe operation, maintenance, and proper use of the wheel chock.
Step-by-step instructions for attaching mounting plates and securing the wheel chock to a surface.
The Sealey Motorcycle Wheel Chock, available in models WC06, WC07, and WC08, is a robust and essential accessory designed to securely support the wheel of a motorcycle during transit or storage. Manufactured to a high standard, this product is constructed from heavy-duty tubular steel, finished with a black powder coating for enhanced durability and corrosion resistance. Its design incorporates pre-drilled holes and fixings, allowing the chock to be securely mounted to various suitable surfaces, such as trailer beds, garage floors, or workshop benches.
The primary function of the Sealey Motorcycle Wheel Chock is to provide stable support for a motorcycle's front or rear wheel, preventing it from moving or tipping. This is particularly crucial when transporting a motorcycle in a trailer or van, as it minimizes the risk of damage to the bike or the vehicle. In a storage context, the wheel chock helps maintain the motorcycle's upright position, freeing up valuable space and reducing the need for cumbersome tie-downs or stands. The design ensures that when a wheel is loaded into the chock, it is secured against forward movement, enhancing overall stability.
The Sealey Motorcycle Wheel Chock series offers three distinct models, each tailored to accommodate different maximum tyre widths:
These specifications ensure that users can select the appropriate model for their specific motorcycle, guaranteeing a snug and secure fit. The chocks are made from heavy-duty tubular steel, providing a strong and reliable structure capable of withstanding the forces exerted by a motorcycle. The black powder-coated finish not only contributes to its aesthetic appeal but also offers a protective layer against environmental elements, extending the product's lifespan.
The assembly components include:
Installation of the Sealey Motorcycle Wheel Chock involves a straightforward assembly process. First, the steel threaded studs (D) are inserted from the underside of the wheel chock into the front holes and secured from the top surface using the 1/4" x 5/8" screws (E). Once the chock itself is assembled, the next step is to identify a suitable physical location for mounting. This involves checking for any obstructions and drilling the required 1/4" holes into the intended mounting surface.
The mounting process involves placing the Spacer Mounting Plate (B) directly on the fixing surface, aligning it with the drilled holes. The Slotted Mounting Plate (C) is then placed on top of the Spacer Mounting Plate (B). Crucially, the round hole in the Slotted Mounting Plate (C) must be oriented nearest to the direction of the wheel loading into the chock. This ensures that the chock is securely anchored when the motorcycle wheel pushes forward. The assembly is then secured from the underside using the 2" screws (F), washers (G), and locking nuts (H). The manual also notes that additional fixing holes are available at either end of the wheel chock if extra security is desired.
Proper care and maintenance are critical for the safe and effective operation of the Sealey Motorcycle Wheel Chock. Users are advised to inspect the chock before each use, paying close attention to the tightness of all fasteners and checking for any worn or damaged parts. Any components showing signs of wear or damage should be replaced immediately. It is explicitly stated that users should never attempt to use a damaged chock or modify it in any way, as this could compromise its structural integrity and safety. Regular inspection and timely replacement of parts will ensure the chock continues to provide reliable performance. The product comes with a 12-month warranty from the purchase date, requiring proof of purchase for any claims.
The Sealey Motorcycle Wheel Chock is a practical and durable solution for motorcycle owners seeking a secure and stable method for transporting or storing their bikes. Its robust construction, clear installation instructions, and emphasis on safety make it a valuable addition to any motorcycle enthusiast's toolkit.
General| Brand | Sealey |
|---|---|
| Model | WC06 |
| Category | Motorcycle Accessories |
| Language | English |
